HAJTÁSTECHNIKA

HAJTÁSTECHNIKA - Tel: 0036-1-445-0435 - e-mail: info@reductor-motor.com - skype: reductors

Akció

Termékek

- HAJTÓMŰVEK

- VILLANYMOTOROK

- D.C. MOTOR (12V, 24V)

Kapcsolat

NON-STOP AZ ÖNÖK SZOLGÁLATÁBAN
1145 Budapest Róna u. 127/A.
Tel: 0036-1-445-0435
email: info@reductor-motor.com

Letöltések

- AC motor katalóhus
- DC motor katalógus
- Mechanikus variátor katalógus
- Bolygókerekes hajtómu katalógus
- Kúpkerekes hajtómá katalógus

Elmélet

üzemi tényező, villanymotorok működése, szervó motorok, DC motor működése, léptetőmotorok, frekvenciaváltók, csigahajtóművek, homlokkerekes hajtóművek, bolygókerekes hajtóművek, vibromotorok, ventilátorok

Gyártócégek, márkák

Varvel, Nord, Siti, Watt Drive, Bonfiglioli, Motovario, Spaggiari, Chiaravalli, CHT, Leeson, VEM, Baldor, Lenze, Hydro-mec, Lafert, ICME Motors, WEG, Teco, MGM, SEW, Transtecno, ATB, Bartec, A:O:Smith, Heidolph, Elin Ebg, Siemens, Leroy Somer, Bison, Marelli Motori, Orientalmotor, SPG, Faulhaber, Kelvin, Unimec, Crouzet, THK, Magnetic, Cemp, Carpanelli, Bühler

Egyébb Termékeink

- Egyfokozatú hajtómu

Főoldal / Termékek / DC motorok / gear-motors with two-phase Hall-effect 90° encoder

- gear-motors with two-phase Hall-effect 90° encoder

Connections
1 Green: GROUND 2 Yellow: O.C. B NPN 3 Blue: O.C. A NPN 4 Brown: Vcc (Hall)

gear-motors with
two-phase
Hall-effect 90° encoder

SIX POLES MAGNET THREE PULSES FOR MOTOR TURN
The sequence of the phases A-B is obtained connecting the motor with the polarities printed on the black bottom cover.

HALL-EFFECT SWITCHES
These Hall-effect switches are highly temperature stable and stress-resistant sensors best utilized in applications that provide steep magnetic slopes and low residual levels of magnetic flux density. Each device includes a voltage regulator, quadratic Hall voltage generator, temperature stability circuit, signal chopper stabilized amplifier, Schmitt trigger and an open drain mosfet on a single silicon chip. The on-board regulator permits operation with supply voltages of 3,5 to 24 V. The output mosfet can sink up to 20 mA with suitable output pull up, they can be used directly with bipolar or MOS logic circuits.

Absolute Maximum Ratings

Parameter	Symbol	Value	Units
Supply Voltage	VDD	28	V
Supply Current	IDD	50	mA
Output Voltage	VOUT	28	V
Output Currente	IOUT	50	mA
Storage Temperature Range	TS	-50 to 150	°C
Maximum Junction Temperature	TJ	165	°C

Exceeding the absolute maximum ratings may cause permanent damage. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

General Electrical Specifications

DC Operating Parameters TA = 25 °C, VDD = 3,5V to 24V (unless otherise specified)

Parameter	Symbol	Test Conditions	Min	Type	Max	Units
Supply Voltage	VDD	Operating	3,5		24	V
Supply Current	IDD	B<BRP			5	mA
Output Saturation Voltage	VDSon	IOUT=20mA, B>BOP			0,25	V
Output Leakage Current	IOFF	B<BRP, VOUT=24V		0,3	10	µA
Output Rise Time	tr	RL=1kW, CL=20pF		0,25		µs
Output Fall Time	tr	RL=1kW, CL=20pF		0,25		µs